Dental Machine C6
The Ultimate Solution
C6 is the “heavy metal” milling center by Dental Machine, specifically developed for medium-large labs and dental clinics.
C6 is a table-top, 5-axis, numerically controlled milling/grinding machine, which is very easy to use with 5 axes interpolated continuously. It can mill almost any dental prothesis, cemented or screwed (crown, bridges, models, full dentures, etc.) in any material (wax, PMMA, PEEK, other resins, composites, zirconia, aluminium, titanium, Co-Cr,ceramics, lithium disilicate, etc.).
It takes less than one minute to change from wet to dry milling or vice versa.
C6 – Technical specifications
Use of standard STL files in input for the best compatibility with other components of the system. No commitement to use our materials / tools and no mandatory yearly software updating: it will work forever even if not updated. And you can also choose the colour (RAL table or carbon fibre).
5 Axes in Continuous
5 axes managed in continuous are needed for modern implantology, which places implants in the best position and best angle, with no restriction. Concerning simpler jobs, 5 axes are often useful to reduce the blank thickness (less time and less consumption of materials and tools).
Wide Tools Selection and Great Precision
Hypocycloidal and epicycoidal gearboxes with zero backlash on the 2 rotary axes
Linear encoders on the Cartesian axes for dual closed-loop.
High Power Spindle
The HF Jaeger 3.0 kW Z-62 spindle – with external cooling (included) – can operate up to 60.000 rpm, yet it shows a very high torque at very low rpm: the ideal to mill hard material, such as Titanium and Cobalt-Chrome alloys.
Technical Specifications Unique
|Size||662 (L) x 1000 (P) x 950 (H) mm|
|Weight||230 Kg (507 lb)|
|Number of tools on board||16÷18|
|Eletrospindle||3 kW- Up to 60,000 rpm|
|Tilt angle||A = ±30° C = 360°|
|Blank||diameter = 98,5 mm with border|
thickness = 10÷30 mm
|Tool legth measure||± 0,001 mm (1 μ)|
|Tool length||37 – 50 mm|
|Tool breakage check||automatic|
|Power supply (single phase)||220÷240 V; 50÷60 Hz|
|Air||7 atm (external) – 150 lt/min|
|Motors||Brushless with closed loop encoders|
|Noise level||˂ 60 dB|
|Drive precision: linear axes||± 0,001 mm (1 μ)|
|Drive precision: rotary axes||± 0,0008 rad|
|Duplicated tool management||included|
|Aspiration drive (external)||automatic|
|Driving device||local PC/tablet – remote PC/tablet – smartphone|